Hello Peter, may this post help you ?

http://answers.websitex5.com/post/27107

J.P.

Thanks for the link, Jiper.  The advice is to save the project using the 'batch files' command, but this is what I have done.  I've obviously done it right because the web site works fine when run off the saved file on the usb on the original PC.  But stick the usb into the 2nd PC, and the pictures disappear.  So I'm still stuck.  Any further thoughts much appreciated.

Re... You must keep the same path for your two projects (read again the post 27107, it's written : " Please be aware the path in which you save the project in PC 1 needs to be the same at PC 2. ")

I don't know how to explain you with more details..., (english is not my native langage  and I do just what I can...) but if the 1st project is on your computer as (example) :

C:\Mywork\Objimage\picture001.jpg

it must be the same on the second PC. You have to install your folders and files in the same place ... i.e. :  C:\Mywork (example).

Cheer Up, ...J.P.

Thanks Jiper.  The trouble is, PC1 appears to be formatted very differently from PC2 which makes it impossible to specify identical path names.  Even the removable disk drives are labelled differently (E on one, F on the other) so I can't even save the project onto usb and run it from there.  PC1 is running Windows Vista on an ACER computer; PC2 is running Windows XP on an Eee PC.  Each seems to create its own paths by default, and neither allows a simple C:\name type of file to be created or saved.  Any suggestions?  Thanks.

Sorry Peter I'm too late to answer.... I don't know the solution in this case ? I point your problem to the support. Expect the answer...

J.P.