Marked for Incomedia's attention . . . .

quali sono i parametri precisi ?
perchè a me funziona, ma probabilmente ho messo dei dati diversi.
potete allegare un mini progetto con l'errore

what are the precise parameters ?
because it works for me, but I probably put in different data.
can you attach a mini project with the error

grazie/thanks

...

altro template

Put a shadow behind the css... Round the css with 30... You will see that the bottom round is not good...

you didn't specify that there was also shadow....
however I also put the shadow... if I understand what you mean...
no problems encountered...
Please post ALL the parameters you put in, or attach a little project for testing...

...

See the picture in my post, that's all, you will realise by yourself... Giuseppe Guidahave the same problem so i'm not isolated... Bottom of the css is not viewed wright... SHADOW MUST BE IN THE BACK... This is hapend after new update...

I saw the picture, I don't see any difference with mine.

And you have seen my pictures ?
And the tests I have done and it works the way I have set up, other random tests I will not do... and the defect in the image of Giuseppe Guida , it seems to me just is different from what you put...
so another problem ?
If you post all the parameters, I will give it another try, otherwise ... wait for the STAFF
bye.

I habe no problems with Evo and Pro.

-----

-----------

Hello Croatia

To be able to properly check and solve the issue, can you create a new project, reproduce the issue and send the IWZIP of this new project here?

I will verify the settings carefully to be able to help you solve this

I remain available here

Stefano

Nel mio caso il problema dei bordi "tagliati" si presenta solo se si usa l'oggetto immagine e dipende dalle dimensioni dell'immagine (in pratica l'immagine ha uno z-index maggiore di quello del bordo e va oltre i limiti dello stesso sovrapponendosi al bordo e dando l'impressione che il bordo sia "tagliato" negli angoli)

***** GOOGLE TRANSLATE *****

In my case the problem of the "cropped" edges occurs only if the image object is used and it depends on the dimensions of the image (in practice the image has a z-index greater than that of the edge and goes beyond the limits of the same overlapping the edge and giving the impression that the edge is "cropped" in the corners)

P.S. @Claudio, ho messo come valore 40 per i tutti i bordi arrotondati

questo il progettino, in allegato...

si visto ma, basta aumentare leggermente i margini interni... e direi che lo fa solo se l'immagine è più grande della cella che lo contiene...  a mio parere è il comportamento corretto... l'immagine non viene tagliata.. (a mio parere, ovvio)

yes seen but, just increase the inner margins slightly...and I would say it only does that if the image is larger than the cell that contains it...in my opinion that is the correct behavior...the image is not cut off... (in my opinion, of course)

Sì, sembrerebbe corretto... anche a me è bastato agire sui margini interni dell'immagine e tutto si è risolto (non si parlava di immagini tagliate ma di bordi arrotondati tagliati). Ad ogni modo su altri oggetti non noto nulla di strano con i bordi arrotondati. Saluti

TRANSLATE

Yes, it would seem correct... it was enough for me too to act on the internal margins of the image and everything was resolved (there was no mention of cut images but of cut rounded edges). However on other objects I don't notice anything strange with the rounded edges. Regards

I will test more on my other project...